FEWESD02-007

Project Goal
The principal objective of this work is to characterize the elastic anisotropic properties of clay-rich rocks for consolidation conditions simulating compaction at depths of 0-2 km in young sedimentary basins of interest for hydrocarbon exploration. To realize this objective, researchers will develop an entirely new laboratory apparatus capable of directly measuring the anisotropic properties of clay-rich rocks subjected to stress states simulating confinement at depth. The ultrasonic phased-array compaction cell that will be designed and fabricated at Lawrence Berkeley National Laboratory (LBNL) will employ a P-wave ultrasonic phased-array and a series of resonant P- and broadband S-wave transducers to recover the five transverse isotropic (TI) elastic constants of clay-rich rocks during compaction, without the need for sample unloading, recoring, or reorienting.

Performer
Lawrence Berkeley National Laboratory
Berkeley, CA

Project Results
This project has successfully developed a state-of-the-art laboratory device for measuring the anisotropic elastic constants of clay-rich rocks during compaction. This device employs an ultrasonic compressional wave phased-array and resonant P-wave and broadband shear wave transducers. The project performers have used this device to measure the evolution of transverse anisotropy in compacting clay-rich sediments provided by industry partners from reservoirs in West Africa. In the final year of the project, additional anisotropy measurements will be collected on clay-rich core provided by Chevron and BP. This data will be used to develop a stress-dependent effective medium model that describes the evolution of transverse anisotropy in clay-rich rocks for use in seismic imaging and AVO efforts.

Benefits
The financial impact of properly incorporating anisotropy in seismic imaging and analysis can be measured as the cost of a dry hole versus the value of a discovery well. With the typical cost of a well at $5-10 million, knowledge of the anisotropic properties of the overburden required for proper time-to-depth conversion can be significant, particularly in sedimentary basins. This project represents a collaborative effort between LBNL and the oil and gas industry to quantify the magnitude and character of the anisotropy of clay-rich rocks at depths of 0-2 km. This effort will utilize expertise in laboratory rock physics and ultrasonic phased-arrays that resides at LBNL to develop a new laboratory technology anisotropy measurement and to apply this technology to develop a new data set quantifying the stress-dependent anisotropic properties of clay-rich rocks.

Background
There is a growing concern that anisotropy in the overlying reservoir strata, when left uncorrected for, can hinder efforts to image reservoir structure and estimate reservoir properties using seismic methods. While clay-rich rocks are estimated to comprise 75% of sedimentary basins, only a limited number of experimental anisotropy studies have been performed on such rocks, especially for higher porosity clay-rich sediments/rocks encountered in the first two kilometers of depth. New data on the stress-dependent anisotropic properties of compacted clay-rich rocks (i.e., c11, c33, c55, c66, c13 or can be used directly to achieve proper focusing in anisotropic imaging and to provide amplitude corrections for AVO and may provide valuable information on overpressure that can be used in borehole stability analysis.

Despite the growing data set on shale anisotropy present in the literature, anisotropy data for less-consolidated and diagenetically altered clay-rich rocks (25-45% porosity, 0-2 km depth) is presently sparse (especially ). The project performers will use the ultrasonic phased-array compaction cell to fill this gap by developing a new data set describing the magnitude and character of the anisotropy of shallow (0-2 km depth) clay-rich rocks from sedimentary basins that are of interest for hydrocarbon exploration. Using the knowledge gained from these experiments and microstructural analysis of the compacted samples (from X-ray diffraction, SEM, and possibly neutron diffraction), the researchers propose to develop stress-dependent effective-medium models describing the influence of compaction-induced texture on the anisotropic properties of clay-rich rocks.

Project Summary

• Developed and tested a new apparatus (phased array compaction cell) for measuring the transverse isotropic elastic constants of a compacting clay-rich sediment.
• Completed anisotropy measurements on compacting clay-rich geochemical cores provided by our Industry partners.
• Obtained new data on the evolution of Thomsen parameters with (one-dimensional) consolidation.
• Initiated technology transfer to Industry.
• Demonstrated that the phased array compaction cell can be used to measure stress induced anisotropy in unconsolidated sands.

Project Start: May 27, 2002
Project End: April 6, 2006

Anticipated DOE Contribution: $721,000
Performer Contribution: $0

Contact Information
NETL – Jim Barnes (jim.barnes@netl.doe.gov or 918-699-2076)
LBNL- Seiji Nakagawa (snakagawa@lbl.gov or 510-486-7894)

A cross section of the ultrasonic phased-array compaction cell showing the locations of the P-wave phased array and pinducer.

The fully operational ultrasonic phased-array compaction cell.

Publications
Two journal submissions are in preparation: one describing the ultrasonic phased-array compaction cell, and a second presenting the anisotropy measurements and analyses on marine sediments provided by industry partners.