Publications
2011 Conference Proceedings
2011 University Turbine Systems Research Workshop
October 25-27, 2011
PRESENTATIONS
Tuesday, October 25, 2011
- H2 Turbine Development for IGCC with CCS: Project Overviews and Technical Issues [PDF-1.12MB]
Susan Scofield, Siemens Energy, Inc.
- GE Energy's DOE Advanced IGCC/Hydrogen Gas Turbine Program [PDF-1.16MB]
Roger Schonewald, GE Energy
- DOE FE Hydrogen Turbine Program Overview [PDF-1.66MB]
Richard Dennis, U.S. Department of Energy, National Energy Technology Laboratory
- Natural Gas Combined Cycle Power Generation [PDF-1.56MB]
Robert Steele, Electric Power Research Institute
- Overview of Gas Turbine R&D at The Ohio State University [PDF-6.02MB]
Meyer (Mike) Benzakein, Director of The Ohio State University's Center for Propulsion and Power
- An Experimental and Chemical Kinetics Study of the Combustion of Syngas and High Hydrogen Content Fuels [PDF-1.61MB]
Robert Santoro, Pennsylvania State University
- Turbulent Flame Speeds and NOx Kinetics of HHC Fuels with Contaminants and High Dilution Levels [PDF-4.07MB]
Eric Petersen, Texas A&M University
- Turbulent Flame Propagation Characteristics of High Hydrogen Content Fuel [PDF-2.21MB]
Tim Lieuwen, Georgia Institute of Technology
- Dinner – Overmyer Grand Ball Room [PDF-2.08MB]
Invited Speaker Charles D. McConnell, Chief Operating Officer, U.S. Department of Energy, Office of Fossil Energy
- Improving Durability of Turbine Components Through Trenched Film Cooling and Contoured Endwalls [PDF-3.23MB]
David Bogard, University of Texas at Austin
Karen Thole, Pennsylvania State University
- Aerodynamics and Heat Transfer Studies of Parameters Specific to the IGCC-Requirements: Endwall Contouring, Leading Edge Filleting, and Blade Tip Ejection Under Rotating Turbine Conditions [PDF-5.32MB]
Meinhard Schobeiri, Texas A&M University
- Designing Turbine Endwalls for Deposition Resistance with 1,400°C Combustor Exit Temperatures and Syngas Water Vapor Levels [PDF-6.79MB]
Jeffrey Bons, The Ohio State University
- Thermal Barrier Coatings [PDF-MB]
Nitin Padture, The Ohio State University
- Hafnia-Based Nanostructured Thermal Barrier Coatings for Advanced Hydrogen Turbine Technology [PDF-6.42MB]
Chintalapalle Ramana, University of Texas at El Paso
- Mechanisms Underpinning Degradation of Protective Oxides and Thermal Barrier Coatings in High Hydrogen Content (HHC)–Fueled Turbines [PDF-MB]
Daniel Mumm, University of California at Irvine
Wednesday, Octotober 26, 2011
- OEM Panel – Perspectives on R&D Needs for Gas Turbine Power Generation
Industry Review Committee:
Michael Koenig, Siemens Energy, Inc.
- Perspective on R&D Needs for Gas Turbine Power Generation [PDF-1.93MB]
Eli Razinsky, Solar Turbines Incorporated
- Perspective on R&D Needs in a Carbon Constrained World [PDF-556KB]
Robert Steele, Electric Power Research Institute
Joseph Citeno, GE Energy
- Perspectives on R&D Needs for Gas Turbine Power Generation [PDF-589KB]
James Downs, Florida Turbine Technologies, Inc.
- Combustion Dynamics in Multi-nozzle Combustors Operating on High-Hydrogen Fuels [PDF-2.52MB]
Dom Santavicca, Pennsylvania State University
- Swirl-Stabilized Flame Response to Transverse Acoustic Excitation [PDF-1.50MB]
Tim Lieuwen, Georgia Institute of Technology
- Development and Experimental Validation of Large-Eddy Simulation Techniques for the Prediction of Combustion-Dynamic Processes in Syngas Combustion [PDF-8.50MB]
Matthias Ihme, University of Michigan
- Joint Computational/Experimental Study of Flashback in Hydrogen-Rich Gas Turbines [PDF-4.86MB]
Venkat Raman, University of Texas at Austin
- Invited Presentation – Supercritical CO2 Power Cycle Development Summary at Sandia National Laboratories [PDF-3.67MB]
Steven A. Wright, Sandia National Laboratories
- Structure and Dynamics of Fuel Jets Injected into a High-Temperature Subsonic Crossflow: High-Data-Rate Laser Diagnostic Investigation under Steady and Oscillatory Conditions [PDF-13.79MB]
Robert Lucht, Purdue University
- Low-Swirl Injectors for Hydrogen Gas Turbines [PDF-3.34MB]
Robert Cheng, Lawrence Berkeley National Laboratory
- Materials and Component Development for Advanced Turbine Systems: Aerothermal Research for Coal-Gas Based Turbine Systems
Karen Thole, Pennsylvania State University
- Cooling Strategies for Vane Leading Edges in a Syngas Environment Including Effects of Deposition and Turbulence [PDF-5.53MB]
Forrest Ames, University of North Dakota
- Effects of Hot Streak and Phantom Cooling on Heat Transfer in a Cooled Turbine Stage Including Particulate Deposition [PDF-6.95MB]
Jeffrey Bons, The Ohio State Universtiy
- Overview of NETL's High Temperature Heat Transfer and Film Cooling Test Facility [PDF-2.87MB]
Douglas Straub, U.S. Department of Energy, National Energy Technology Laboratory
- Verification and Validation Issues in CFD Analysis of Turbine Cooling [PDF-9.86MB]
Tom Shih, Ames Laboratory/Purdue University
- Advanced Thermal Barrier Coatings for Operation in High Hydrogen Content Fueled Gas Turbines [PDF-MB]
Sanjay Sampath, Stony Brooke University
- Computational Design and Experimental Validation of New Thermal Barrier Systems [PDF-MB]
Shengmin Guo, Louisiana State University
- Degradation of TBC Systems in Environments Relevant to Advanced Gas Turbines for IGCC Systems [PDF-MB]
Brian Gleeson, University of Pittsburgh
- Low Thermal Conductivity, High Durability Thermal Barrier Coatings for IGCC Environments [PDF-6.07MB]
Eric Jordan, University of Connecticut
- Coating Issues in Coal-Derived Synthesis Gas/Hydrogen-Fired Turbines [PDF-8.23MB]
Bruce Pint, Oak Ridge National Laboratory
Thursday, Octotober 27, 2011
- The UTSR Impact: Key Accomplishments, Benefits to OEM's, and Status of Fellowship [PDF-832KB]
William H. Day, Leonardo Technologies, Inc.
Parallel Session – Combustion – Pfahl Hall Conference Center, 2nd Floor, Room 230
Moderator – Mark Freeman, U.S. Department of Energy, National Energy Technology Laboratory
- Development of Criteria for Flameholding Tendencies Within Premixer Passages for High Hydrogen Content Fuels [PDF-4.50MB]
Vincent McDonell, University of California at Irvine
- Fundamental Studies to Enable Robust, Reliable, Low Emission Gas Turbine Combustion of High Hydrogen Content Fuels [PDF-2.80MB]
Margaret Wooldridge, University of Michigan
- Demonstration of Enabling Spar and Shell Cooling Technology in Gas Turbines [PDF-1.03MB]
James Downs, Florida Turbine Technologies, Inc.
- Status of High Pressure and Temperature IGCC Turbine Deposition and Film-Cooling Testing at NETL [PDF-2.04MB]
Andrew Nix, West Virginia University
- Preparation and Testing of Corrosion and Spallation Resistant Coatings [PDF-1.22MB]
John Hurley, University of North Dakota, Energy & Environmental Research Center
- An Alternative Low-Cost Process for Deposition of MCrAlY Bond Coats for Advanced Syngas/ Hydrogen Turbine Applications [PDF-9.88MB]
Brian Bates, Tennessee Technological University
Poster Presentations
- Advanced Laser Machining Techniques for Cooling Holes in Gas Turbines
John Steinbeck, Physical Sciences, Inc.
- Heat Transfer Analyses of Internal Cooling Passages of Turbine Blades and Nozzles [PDF-688KB]
Matthew Mihelish, University of North Dakota
- Alternative Combustion Technology for High Hydrogen Content Fuel [PDF-580KB]
Bidhan Kumar Dam, University of Texas at El Paso
- Effects of Coal Fly Ash and Volcanic Ash on Thermal Barrier Coatings [PDF-16.21MB]
Andrew Gledhill, The Ohio State University
- 3-D Imaging of Single-Nozzle and Multi-Nozzle Flames
Domenic A. Santavicca, Pennsylvania State University
- Ash Deposition on Nozzle Guide Vanes [PDF-1.53MB]
Carlos Bonilla, The Ohio State University
- Transverse Combustion Instabilities in Low-Emissions Gas Turbine Combustors
Tim Lieuwen, Georgia Institute of Technology
- Hot Corrosion Resistance of YSZ, Gd2Zr2O7 and Gd2Zr2O7+YSZ Composite Thermal Barrier Coatings [PDF-192KB]
Shengmin Guo, Louisiana State University
- Integrating Flow Control into Low-Pressure Turbine Design [PDF-1.24MB]
Stuart Benton, The Ohio State University
- Aerodynamics and Heat Transfer Studies of Parameters Specific to the IGCC-Requirements: Endwall Contouring, Leading Edge Filleting, and Blade Tip Ejection under Rotating Turbine Conditions [PDF-500KB]
Meinhard Schobeiri, Texas A&M University
- Gas Turbine Design Competition at Texas A&M University [PDF-790KB]
Meinhard Schobeiri, Texas A&M University
- High Temperature Unique Low Thermal Conductivity Thermal Barrier Coating (TBC) Architectures [PDF-1.75MB]
Jose Nainaparampil, UES, Inc.
- Computational Modeling of Ash Deposition in Turbine Engines
Brian Casaday, The Ohio State University
- The Interactive Effects of Turbine Film Cooling, Deposition, and Thermal Barrier Coatings [PDF-703KB]
F. Todd Davidson, University of Texas at Austin
- Advanced Turbine Research Capabilities at the University of Texas at El Paso
Chintalapalle V. Ramana, University of Texas at El Paso
- Measurements and Modeling of Turbulent Flame Speeds of H2/CO Mixtures
Tim Lieuwen, Georgia Institute of Technology
- FARADAYIC Development of Electrically Mediated Electrophoretic Deposition for Thermal Barrier Coatings [PDF-8.79MB]
Joseph Kell, Faraday Technology, Inc
- Characterization of Turbulence-Induced Non-Idealities in Rapid Compression Machines [PDF-1.28MB]
Matthias Ihme, University of Michigan
- Coriolis Rig Heat Loss Scheme Verification and New Test Section Design [PDF-665KB]
Robert Murphy, West Virginia University
- Development of Novel Thermally-Prayed Architectures for High Temperature Barrier Coatings
Gopal Dwivedi, Stony Brook University
- The Effect of Water Vapor on Non-Ideal Oxide Growth in NiCoCrA1Y TBC Bond Coat Systems
Matthew Sullivan, University of California, Irvine
- Laminar Flame Speed of Syngas and Hydrogen at Elevated Temperatures [PDF-1.63MB]
Michael Krejci, Texas A&M University
- Design and Development of Turbulent Flame Speed Vessel [PDF-1.65MB]
Sankaranarayanan Ravi, Texas A&M University
- Penetration Height Correlations for Oil-In-Water Unsteady Emulsions of a Liquid Jet in Cross Flow at Gas Turbine Conditions [PDF-2.61MB]
Leonard Kolshak, Florida Atlantic University
NETL Conference Services Information
National Energy Technology Laboratory
Phone: (412) 386-6044
FAX: (412) 386-6486
E-mail: kimberly.yavorsky@netl.doe.gov
Disclaimer
This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government or any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof.
NOTE: The papers listed above are in Portable Document Format (PDF). It is recommended to use the Adobe Acrobat Reader 7.0 or newer from Adobe Systems, Inc. to view the Proceedings.
|