Publications
2010 Conference Proceedings
University Turbine Systems Research Workshop
October 19-21, 2010
Table of Contents
PRESENTATIONS
Tuesday, October 19. 2010
Keynote Presentations
Combustion
Aero/Heat Transfer
Wednesday, October 20, 2010
Keynote Presentations
Aerodynamics/Heat Transfer
Materials
- Advanced Thermal Barrier Coatings for Operation in High Hydrogen Content Gas Turbines[PDF-5.5MB]
Christopher Weyant, Stony Brook University
Sanjay Sampath, Stony Brook University
- Mechanisms Underpinning Degradation of Oxides and Thermal Barrier Coatings in High Hydrogen Content (HHC) - Fueled Turbines [PDF-12.4MB]
Daniel Mumm, University of California - Irvine
- Computational Design and Experimental Validation of New Thermal Barrier Systems
Shengmin Guo, Louisiana State University
Shizhong Yang, Southern University
Ebrahim Khosravi, Southern University
- Materials for Oxy-Fuel Turbomachine Conditions [PDF-4.2MB]
Gerald Meier, University of Pittsburgh
- Evaluating Coatings for Current and Future Service [PDF-3.3MB]
Ted Bennett, University of California - Santa Barbara
- Hafnia-Based Nanostructured Thermal Barrier Coatings for Advanced Hydrogen Turbine Technology [PDF-3.4MB]
Chintalapalle Ramana, University of Texas - El Paso
- Degradation of Thermal Barrier Coatings from Deposits and Its Mitigation
Nitin Padture, Ohio State University
Combustion
Thursday, October 21, 2010
Keynote Presentations
Combustion
Materials and Aerodynamics/Heat Transfer
POSTER PRESENTERS
- Evaporative Metal Bonding of CM247LC to Kanthal APMT [PDF-1.1MB]
John Hurley and Dustin McNally, Energy and Environmental Research Center
Zafir Abdo and Allister James, Siemens Energy
- Development of Electrically Mediated Electrophoretic Deposition for Thermal Barrier Coatings [PDF-4.2MB]
Joseph Kell, Faraday Technology Inc
- Novel Coating Methods for Unique TBC/Bond Coat Architectures for Elevated Temperature Operation
Derek Hass, Directed Vapor Technologies International, Inc
- Tailored Microstructure of EB-PVD YSZ Thermal Barrier Coatings (TVC) [PDF-3.0MB]
Douglas W. Wolfe, Penn State University
- Characterization of Rust for Turbine Component Studies [PDF-791KB]
Duane Breneman, Penn State University
- Flowfield Measurements in a Single Row of Low Aspect Ratio Pin-Fins [PDF-781KB]
Jason Ostanek, Penn State University
- Forced Flame Response of a Lean Premixed Multi Nozzle Can Combustor [PDF-579KB]
Michael Szedlmayer, Penn State University, The Center for Advanced Power Generation
- Comparison Between Self-Excited and Forced Flame Response of an Industrial Lean Premixed Gas Turbine Injector [PDF-312KB]
Stephen Peluso, Penn State University, The Center for Advanced Power Generation
- Fuel-Forced Flame Response of a Lean-Premixed Combustor [PDF-4.0MB]
Poravee Orawannkul, Penn State University, The Center for Advanced Power Generation
- Effect of Pressure on the Flame Transfer Function of a Lean Premixed Combustor [PDF-536KB]
Nick Bunce, Penn State University, The Center for Advanced Power Generation
- High Temperature Unique Low Thermal Conductivity Thermal Barrier Coating (TBC) Architectures
A.K. Rai, UES, Inc.
- Thermally Sprayed Materials for High Temperature Thermal Barrier Coating Systems
Yang Tan, Sanjay Sampath, and Christopher M. Weyant, Stony Brook University
Satish Dixit and Michael Chin, Plasma Technology, Inc.
- Oxidation of SiC/BN/SiC Composites in Reduced Oxygen Partial Pressures [PDF-1.4MB]
Elizabeth Opila, University of Virginia
Meredith Boyd, University of Rochester
- Advanced Cooling Turbine Blades [PDF-1.0MB]
Mike Appleby and Jill Klinger, Mikro Systems
- Water Guided Laser Drilling of High Temperature Alloys
John Steinbeck and Frederick Lauten, Physical Sciences, Inc.
- Vane Clocking Effects on Compressor Stage Efficiency
Nicole Key and Natalie Smith, Purdue University
- A Novel Micro Circuit Based Film Cooling Design For a Ceramic Combustor Liner
J.M. Mehta, Don Bahr, Ely Halila, and Effie Gutmark, Innovative Science Engineering and Management LLC (ISEM, LLC)
- High Temperature Bond and Thermal Barrier Coatings [PDF-1.0MB]
Kyle Murphree, Anatoliy Shchetkovskiy, and Tim McKechnie, Plasma Processes, Inc.
- Updated H2/O2 Model to Address High-Pressure Flame Burning Rate Discrepancies [PDF-276KB]
Michael P. Burke, Marcos Chaos, Yiguang Ju, Frederick L. Dryer, Stephen J. Klippenstein, Princeton University
- Progress on a Methodology for the Formulation of Jet Fuel Surrogates [PDF-371KB]
Frederick L. Dryer, Stephen Dooley, Sang Hee Won, Joshua Heyne, Yiguang Ju, Chih-Jen Sung, Haowei Wang,
Matthew A. Oehlschlaeger, Robert J. Santoro, Princeton University
- Monitoring Compliance of Thermal Barrier Coatings: Application to Coating Design and Assessment of Their Repeatability
Gopal Dwivedi, Penn State University
NETL Conference Services Information
National Energy Technology Laboratory
Phone: (412) 386-6044
FAX: (412) 386-6486
E-mail: kimberly.yavorsky@netl.doe.gov
Disclaimer
This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government or any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof.
NOTE: The papers listed above are in Portable Document Format (PDF). It is recommended to use the Adobe Acrobat Reader 7.0 or newer from Adobe Systems, Inc. to view the Proceedings.
|
ABOUT NETL
Deepwater Technology