Table of Contents

• Disclaimer
• Papers and Presentations
  • Fuel Processing Technologies
  • Cell/Stack Materials and Manufacturing Processes
  • Stack/System Performance and Modeling
  • Power Electronics

Disclaimer
This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government or any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof.

Papers and Presentations

• Welcome
  Dr. Gary McVay, PNNL
• SECA: Scope and Challenges [PDF-1.5MB]
  Mr. Wayne Surdoval, NETL
• Workshop Goals and Procedures
  Dr. Gary McVay

Technical Discussions/Topical Areas:

Fuel Processing Technologies
Current status/issues/prioritization; gas/liquid handling, poisons, carbon formation, materials degradation, water sufficiency, system efficiency, etc.

• Fuel Cells for Transportation: Fuel DOE Processing Technology [PDF-3.5MB]
  Dr. Patrick B. Davis
• Natural Gas Fuel Processing FuelCell Energy, Inc. Experience and Issues [PDF-1.5MB]
  Dr. Pinakin S. Patel
• Diesel Reforming for Solid Oxide Power Generation [PDF-98KB]
  Dr. David L. King, PNNL

Cell/Stack Materials and Manufacturing Processes
Current status/issues/prioritization; electrode chemical and structural stability, interface stability, interface modification, low-temperature, operation, process optimization, current collector materials, seals, insulation, redox anode, iR and polarization minimization.

• SOFC Materials and Processing Issues [PDF-413KB]
  Dr. Anil Virkar, Materials and Systems Research, Inc./ University of Utah

Stack/System Performance and Modeling
Current Status/issues/prioritization; electrical, thermal, chemical model, normal and transient operation, internal/direct oxidation model, cell/stack/system model.

• SOFC System Development and R&D Needs [PDF-632KB]
  Dr. Nguyen Minh, Honeywell
• SOFC Auxiliary Power Unit: Status and Challenges for Automotive Applications [PDF-850KB]
  Dr. Subhasish Mukerjee, Delphi Automotive Systems

Power Electronics
Current status/issues/ prioritization, technology gaps, large-scale manufacturing issues, meeting cost targets for Phases 1-3.

• Lower Cost Power Electronics System Blocks for DG and Automotive Applications
  Mr. Chris Kambouris, Ecostar

Overall Prioritization/Final Adjustments
Gary McVay, Leader; Participants